DSC ALARM PANEL ORANGE TRIANGLE UPDATE
DSC ALARM PANEL ORANGE TRIANGLE CODE

If a 6 is indicated, the system has detected a tamper condition and you should contact your security company immediately. Check the sensors in that zone and correct the issue if possible. If a 5 is displayed, press to determine which zone is affected. If the numbers 5,6, or 7 are displayed, then the issue may be with your system sensors such as keyfobs, keypads, door and window transmitters, or other wireless sensors. If youРІР‚в„ўve attempted to correct the issues mentioned above and your panel is still beeping, contact your alarm company, so they can check the system.

DSC ALARM PANEL ORANGE TRIANGLE CODE

Code 4: Failure to CommunicateР”Р„s the Captain said to Cool Hand Luke, РІР‚СљWhat weРІР‚в„ўve got here is a failure to communicate.РІР‚Сњ If the panel cannot reach its monitoring station, which is how emergencies are reported to the authorities, itРІР‚в„ўs going to beep. If there is no dial tone, call the phone company for service.

DSC ALARM PANEL ORANGE TRIANGLE UPDATE

If you recently had a cable telephone or DSL service installed, you may need to have them update your service. If your basic troubleshooting fails, you may need to contact your security company for additional inspection. If you have a dial tone, make sure that your panel is connected to the phone box. Test this by plugging a home phone into a phone jack and check for a dial tone. This means that your system has detected that the telephone line is out. Still at a loss? Contact your provider for service. If youРІР‚в„ўre still beeping, you may need to replace the transformer. If you have power, however, make sure that your transformer is plugged in snugly, then check your homeРІР‚в„ўs circuit breakers. If your building or the neighborhood has lost power, your system will operate on battery, but itРІР‚в„ўll let you know itРІР‚в„ўs operating on battery. This means your panel isnРІР‚в„ўt getting power. If not, contact your alarm company for service. If you have access to the panel, you can do this yourself. If the beeping keeps on beeping and beeping, however, youРІР‚в„ўll probably have to replace the battery. If it displays РІР‚Сљlow batteryРІР‚Сњ and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge.

The culprits may be a low battery (1), bell circuit (2), system trouble (3), system tamper (4), module supervision (5), RF jam detected (6), PC5204 low battery (7), or PC5205 AC Failure. It just depends on the problem and your confidence in your troubleshooting abilities. While your alarm needs some attention, you may be able to handle it yourself.

Dsc alarm panel orange triangle